안녕하세요
인포믹스를 사용하는데요
test환경에서 셋팅후 사용하는데 사용하다보면 자꾸
죽어버리네요..!
로그에는 아래와같이 오류가나는데..
첨 설치하면 잘되가가 몇일 지나면 이렇게 되어버리네요 ^^..!
어떤걸 어떻게 바꿔줘야하는지? 궁굼합니다.
스타트 했다가도 명령어 한개 치면 - - 다운되버려요 ^^;;
c드라이브에는 tmpshmem.3f7e0c0.0 파일이 왕창 생겨버리네요
^^;;
ㅎㅎ
15:59:03 Booting Language <c> from module <>
15:59:03 Loading Module <CNULL>
15:59:03 Booting Language <builtin> from module
<>
15:59:03 Loading Module <BUILTINNULL>
15:59:08 Informix Dynamic Server 2000 Version 9.20.TC4 Software
Serial Number AAC#J899734
15:59:08 Informix Dynamic Server 2000 Initialized -- Shared Memory
Initialized.
15:59:08 Physical Recovery Started.
15:59:09 Physical Recovery Complete: 56 Pages Restored.
15:59:09 Logical Recovery Started.
15:59:12 Assert Failed: Rollback error 126
15:59:12 Informix Dynamic Server 2000 Version 9.20.TC4
15:59:12 Who: Session(8, informix@leeilkuk, 0, 0)
Thread(15, fast_recvry, 0, 1)
File: rstrans.c Line: 2216
15:59:12 Results: Log record (OLDRSAM:HDELETE) in log 64, offset
0x148960 was not rolled back
15:59:12 Action: Use 'onlog' to view the transaction and repair
manually.
15:59:12 stack trace for pid 3432 written to
c:\tmp\af.3f7e0c0
15:59:12 See Also: c:\tmp\af.3f7e0c0, shmem.3f7e0c0.0
15:59:14 Releasing server from system block
15:59:31 Rollback error 126
15:59:31 Assert Failed: Rollback error 126
15:59:31 Informix Dynamic Server 2000 Version 9.20.TC4
15:59:31 Who: Session(8, informix@leeilkuk, 0, 0)
Thread(15, fast_recvry, 0, 1)
File: rsextlog.c Line: 1580
15:59:31 Results: Log record (OLDRSAM:HDELETE) in log 64, offset
0x148960 was not rolled back
15:59:31 Action: Use 'onlog' to view the transaction and repair
manually.
15:59:31 stack trace for pid 3432 written to
c:\tmp\af.3f7e0c0
15:59:31 See Also: c:\tmp\af.3f7e0c0, shmem.3f7e0c0.1
15:59:52 Rollback error 126
15:59:52 Logical Logging error in 'rollback'
15:59:53 Assert Failed: Dynamic Server 2000 must abort
15:59:53 Informix Dynamic Server 2000 Version 9.20.TC4
15:59:53 Who: Session(8, informix@leeilkuk, 0, 0)
Thread(15, fast_recvry, 0, 1)
File: rslog.c Line: 3194
15:59:53 Results: Dynamic Server 2000 must abort
15:59:53 Action: Reinitialize shared memory
15:59:53 stack trace for pid 3432 written to
c:\tmp\af.3f7e0c0
15:59:53 See Also: c:\tmp\af.3f7e0c0, shmem.3f7e0c0.2
16:00:12 PANIC: Attempting to bring system down
16:00:12 rslog.c, line 3194, thread 15, proc id 3432, Dynamic
Server 2000 must abort.
----------------------------------------config--------------------
#**************************************************************************
#
# INFORMIX SOFTWARE, INC.
#
# Title: onconfig.std
# Description: Informix Dynamic Server Configuration
Parameters
#
#**************************************************************************
# Root Dbspace Configuration
ROOTNAME rootdbs # Root dbspace name
ROOTPATH c:\IFMXDATA\portaldb\rootdbs_dat.000 # Path for device
containing root dbspace
ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes)
ROOTSIZE 30720 # Size of root dbspace (Kbytes)
# Disk Mirroring Configuration Parameters
MIRROR 0 # Mirroring flag (Yes = 1, No = 0)
MIRRORPATH # Path for device containing mirrored root
MIRROROFFSET 0 # Offset into mirrored device (Kbytes)
# Physical Log Configuration
PHYSDBS rootdbs # Location (dbspace) of physical log
PHYSFILE 2000 # Physical log file size (Kbytes)
# Logical Log Configuration
LOGFILES 6 # Number of logical log files
LOGSIZE 1500 # Logical log size (Kbytes)
LOG_BACKUP_MODE MANUAL # Logical log backup mode (MANUAL,
CONT)
# Diagnostics
MSGPATH c:\informix\portaldb.log # System message log file
path
CONSOLE c:\informix\conportaldb.log # System console message
path
ALARMPROGRAM c:\informix\etc\no_log.bat # Alarm program path
TBLSPACE_STATS 1 # Maintain tblspace statistics
# System Diagnostic Script.
# SYSALARMPROGRAM - Full path of the system diagnostic script
(e.g.
# c:\informix\etc\evidence.bat.) Set this parameter
# if you want a different Diagnostic Script
than
# {INFORMIXDIR}\etc\evidence.bat, which is
default.
# System Archive Tape Device
#TAPEDEV \\.\TAPE0 # Tape device path
TAPEDEV NUL # Tape device path
TAPEBLK 16 # Tape block size (Kbytes)
TAPESIZE 10240 # Maximum amount of data to put on tape
(Kbytes)
# Log Archive Tape Device
#LTAPEDEV \\.\TAPE1 # Log tape device path
LTAPEDEV NUL # Log tape device path
LTAPEBLK 16 # Log tape block size (Kbytes)
LTAPESIZE 10240 # Max amount of data to put on log tape
(Kbytes)
# Optical
STAGEBLOB # Informix Dynamic
Server/Optical staging area
OPTICAL_LIB_PATH # Location of Optical Subsystem driver DLL
# System Configuration
SERVERNUM 5 # Unique id corresponding to a server instance
DBSERVERNAME portaldb # Name of default Dynamic Server
DBSERVERALIASES # List of alternate dbservernames
NETTYPE onsoctcp,1,20,NET # Override sqlhosts nettype
parameters
DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed
env.
RESIDENT 0 # Forced residency flag (Yes = 1, No = 0)
MULTIPROCESSOR 0 # 0 for single-processor, 1 for
multi-processor
NUMCPUVPS 1 # Number of user (cpu) vps
SINGLE_CPU_VP 1 # If non-zero, limit number of cpu
vps to one
NOAGE 0 # Process aging
AFF_SPROC 0 # Affinity start processor
AFF_NPROCS 0 # Affinity number of processors
# Shared Memory Parameters
LOCKS 50000 # Maximum number of locks
BUFFERS 54000 # Maximum number of shared buffers
NUMAIOVPS 1 # Number of IO vps
PHYSBUFF 32 # Physical log buffer size (Kbytes)
LOGBUFF 32 # Logical log buffer size (Kbytes)
LOGSMAX 20 # Maximum number of logical log files
CLEANERS 2 # Number of buffer cleaner
processes
SHMBASE 0xC000000L # Shared memory base address
SHMVIRTSIZE 16384 # initial virtual shared memory segment
size
SHMADD 16384 # Size of new shared memory
segments (Kbytes)
SHMTOTAL 0 # Total shared memory (Kbytes).
0=>unlimited
CKPTINTVL 300 # Check point interval (in
sec)
LRUS 8 # Number of LRU queues
LRU_MAX_DIRTY 25 # LRU percent dirty begin cleaning limit
LRU_MIN_DIRTY 20 # LRU percent dirty end cleaning limit
LTXHWM 50 # Long transaction high water mark percentage
LTXEHWM 60 # Long transaction high water mark (exclusive)
TXTIMEOUT 300 # Transaction timeout (in sec)
STACKSIZE 32 # Stack size (Kbytes)
# System Page Size
# BUFFSIZE - Dynamic Server no longer supports this configuration
parameter.
# To determine the page size used by Dynamic Server on
your platform
# see the last line of output from the command, 'onstat
-b'.
# Recovery Variables
# OFF_RECVRY_THREADS:
# Number of parallel worker threads during fast recovery or an
offline restore.
# ON_RECVRY_THREADS:
# Number of parallel worker threads during an online restore.
OFF_RECVRY_THREADS 10 # Default number of offline worker
threads
ON_RECVRY_THREADS 1 # Default number of online worker threads
# Data Replication Variables
DRINTERVAL 30 # DR max time between DR buffer flushes (in
sec)
DRTIMEOUT 30 # DR network timeout (in sec)
DRLOSTFOUND \tmp # DR lost+found file path
# CDR Variables
CDR_LOGBUFFERS 2048 # size of log reading buffer pool
(Kbytes)
CDR_EVALTHREADS 1,2 # evaluator threads
(per-cpu-vp,additional)
CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds)
CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR
queue (Kbytes)
CDR_LOGDELTA 30 # % of log space allowed in queue
memory
CDR_NUMCONNECT 16 # Expected connections per server
CDR_NIFRETRY 300 # Connection retry (seconds)
CDR_NIFCOMPRESS 0 # Link level compression (-1 never, 0 none,
9 max)
# Backup/Restore variables
BAR_ACT_LOG c:\informix\bar_portaldb.log #Path of log file for
onbar.exe
BAR_MAX_BACKUP 0
BAR_RETRY 1
BAR_NB_XPORT_COUNT 10
BAR_XFER_BUF_SIZE 15
BAR_BSALIB_PATH c:\ISM\2.20\bin\libbsa.dll # Location of ISM XBSA
DLL
RESTARTABLE_RESTORE OFF #To support restartable restore..values
on/off
# Informix Storage Manager variables
ISM_DATA_POOL ISMData
ISM_LOG_POOL ISMLogs
# Read Ahead Variables
RA_PAGES 32 # Number of pages to attempt to read
ahead
RA_THRESHOLD 28 # Number of pages left before next
group
# DBSPACETEMP:
# Dynamic Server equivalent of DBTEMP for SE. This is the list of
dbspaces
# that the Dynamic Server SQL Engine will use to create temp tables
etc.
# If specified it must be a colon separated list of dbspaces that
exist
# when the Dynamic Server system is brought online. If not
specified, or if
# all dbspaces specified are invalid, various ad hoc queries will
create
# temporary files in /tmp instead.
DBSPACETEMP # Default temp dbspaces
# DUMP*:
# The following parameters control the type of diagnostics
information which
# is preserved when an unanticipated error condition (assertion
failure) occurs
# during Dynamic Server operations.
# For DUMPSHMEM, DUMPGCORE and DUMPCORE 1 means Yes, 0 means
No.
DUMPDIR c:\tmp # Preserve diagnostics in this directory
DUMPSHMEM 1 # Dump a copy of shared memory
DUMPGCORE 0 # Dump a core image using 'gcore'
DUMPCORE 0 # Dump a core image (Warning:this aborts Dynamic
Server)
DUMPCNT 1 # Number of shared memory or gcore dumps for
# a single user's session
FILLFACTOR 90 # Fill factor for building indexes
# method for Dynamic Server to use when determining current
time
USEOSTIME 0 # 0: use internal time(fast), 1: get time from
OS(slow)
# Parallel Database Queries (pdq)
MAX_PDQPRIORITY 100 # Maximum allowed pdqpriority
DS_MAX_QUERIES 32 # Maximum number of decision support
queries
DS_TOTAL_MEMORY 4096 # Decision support memory (Kbytes)
DS_MAX_SCANS 1048576 # Maximum number of decision support scans
DATASKIP # List of dbspaces to skip
# OPTCOMPIND
# 0 => Nested loop joins will be preferred (where
# possible) over sortmerge joins and hash joins.
# 1 => If the transaction isolation mode is not
# "repeatable read", optimizer behaves as in (2)
# below. Otherwise it behaves as in (0) above.
# 2 => Use costs regardless of the transaction isolation
# mode. Nested loop joins are not necessarily
# preferred. Optimizer bases its decision purely
# on costs.
OPTCOMPIND 2 # To hint the optimizer
DIRECTIVES 1 # Optimizer DIRECTIVES ON (1/Default) or OFF
(0)
ONDBSPACEDOWN 2 # Dbspace down option: 0 = CONTINUE, 1 =
ABORT, 2 = WAIT
LBU_PRESERVE 0 # Preserve last log for log backup
OPCACHEMAX 0 # Maximum optical cache size (Kbytes)
# HETERO_COMMIT (Gateway participation in distributed
transactions)
# 1 => Heterogeneous Commit is enabled
# 0 (or any other value) => Heterogeneous Commit is
disabled
HETERO_COMMIT 0
SBSPACENAME sbspace # Default sbspace
BLOCKTIMEOUT 3600 # Default timeout for system block
# Optimization goal: -1 = ALL_ROWS(Default), 0 =
FIRST_ROWS
OPT_GOAL -1
ALLOW_NEWLINE 0 # embedded newlines(Yes = 1, No = 0 or
anything but 1)
SYSSBSPACENAME sbspace # Default System sbspace
#
# The following are default settings for enabling Java in the
database.
#
#VPCLASS jvp,num=1 # Number of JVPs to start with
JVPJAVAHOME # JDK installation root directory
JVPHOME c:\informix\extend\krakatoa # Krakatoa installation
directory
JVPLOGFILE c:\informix\extend\krakatoa\portaldb_jvp.log # VP log
file
JVPPROPFILE c:\informix\extend\krakatoa\.jvpprops_portaldb # JVP
property file
JDKVERSION 1.1 # JDK version supported by this
server
JVMTHREAD native # Java VM thread type (green or
native)
# The path to the JDK libraries relative to JVPJAVAHOME
JVPJAVALIB \bin\
# The JDK libraries to use for the Java VM (use _g version for
debugging)
#JVPJAVAVM
javai_g;net_g;zip_g;mmedia_g;jpeg_g;sysresource_g;agent_g
JVPJAVAVM javai;net;zip;mmedia;jpeg;sysresource;agent
# Classpath to use upon Java VM start-up (use _g version for
debugging)
JVPCLASSPATH
c:\informix\extend\krakatoa\krakatoa.jar;c:\informix\extend\krakatoa\jdbc.jar
|